Bond Factor Definition | Law Insider (2024)

  • Load Factor means the percentage of aircraft seats actually occupied on a flight (RPMs divided by ASMs). “NMB” means the National Mediation Board.

  • Interest Factor means monthly compounding, discounting or annuitizing, as applicable, at a rate set forth in Exhibit A.

  • Note Factor means, with respect to a Payment Date and each Class of Notes, a six-digit decimal, which the Servicer will compute each month, equal to the Note Balance of such Class of Notes as of the end of the related Collection Period divided by the Note Balance of such Class of Notes as of the Closing Date. The Note Factor will be 1.000000 as of the Closing Date; thereafter, the Note Factor will decline to reflect reductions in the Note Balance of such Class of Notes.

  • Fit factor means a quantitative estimate of the fit of a particular respirator to a specific individual, and typically estimates the ratio of the concentration of a substance in ambient air to its concentration inside the respirator when worn.

  • Weighting factor wT for an organ or tissue (T) means the proportion of the risk of stochastic effects resulting from irradiation of that organ or tissue to the total risk of stochastic effects when the whole body is irradiated uniformly. For calculating the effective dose equivalent, the values of wT are:

  • Class Factor As to any date of determination and any Class of Certificates (other than the Interest Only Classes and the Residual Certificates), a fraction the numerator of which is (i) the aggregate of the denominations of all Certificates of such Class plus, in the case of each Accrual Class, all interest that has accrued on the Certificates of such Class prior to such date of determination and been added to the Class Balance thereof, less (ii) the aggregate amount of all Principal Distribution Amounts, if any, allocable thereto prior to such date of determination and the denominator of which is the original Class Balance of such Class. As to any date of determination and any Interest Only Class, a fraction, the numerator of which is the percentage of the balance specified for such purpose under “Reference Sheet–Notional Classes” in the Prospectus Supplement (or, if applicable, the sum of the applicable percentages of the balances so specified) and the denominator of which is the original Class Balance thereof. Code: The Internal Revenue Code of 1986, as amended, including any successor or amendatory provisions.

  • Moody’s Discount Factor means, for purposes of determining the Discounted Value of any Moody’s Eligible Asset, the percentage determined by reference to the rating on such asset and the shortest Exposure Period set forth opposite such rating that is the same length as or is longer than the Moody’s Exposure Period, in accordance with the table set forth below: Exposure Period Aaa* Aa* A* Baa* Other** (V)MIG-1*** SP-1+**** Unrated***** 7 weeks 151% 159% 166% 173% 187% 136% 148% 225% 8 weeks or less but greater than seven weeks. 154 161 168 176 190 137 149 231 9 weeks or less but greater than eight weeks 158 163 170 177 192 138 150 240 * Mxxxx’x rating. ** Municipal Obligations not rated by Moody’s but rated BBB by S&P. *** Municipal Obligations rated MIG-1 or VMIG-1, which do not mature or have a demand feature at par exercisable in 30 days and which do not have a long-term rating. **** Municipal Obligations not rated by Moody’s but rated SP-1+ by S&P, which do not mature or have a demand feature at par exercisable in 30 days and which do not have a long-term rating. ***** Municipal Obligations rated less than Baa3 or not rated by Moody’s and less than BBB or not rated by S&P, not to exceed 10% of Moody’s Eligible Assets. Notwithstanding the foregoing, (i) except as provided in clause (ii) below, the Moody’s Discount Factor for short-term Municipal Obligations will be 115%, so long as such Municipal Obligations are rated at least MIG-1, VMIG-l or P-1 by Moody’s and mature or have a demand feature at par exercisable in 30 days or less, or 125%, as long as such Municipal Obligations are rated at least A-1+/AA or SP-1+/AA by S&P and mature or have a demand feature at par exercisable in 30 days or less, (ii) the Moody’s Discount Factor for residual interest municipal bonds and structured notes shall be the product of (x) the percentage determined by reference to the rating on the security underlying such residual interest municipal bond multiplied by (y) 1.25 (provided that the trust in which such residual interest municipal bond is held may be terminated within five business days), and (iii) except as provided in clause (ii) above, no Moody’s Discount Factor will be applied to cash, Receivables for Municipal Obligations Sold, or futures, options and similar instruments (to the extent such securities are Moody’s Eligible Assets); provided, however, that for purposes of determining the Moody’s Discount Factor applicable to a Municipal Obligation, any Municipal Obligation (excluding any short-term Municipal Obligation) not rated by Moody’s but rated by S&P shall be deemed to have a Mxxxx’x rating which is one full rating category lower than its S&P rating.

  • Fitch Discount Factor means the discount factors set forth in the Fitch Guidelines for use in calculating the Agency Discounted Value of the Company’s assets in connection with Fitch’s ratings then assigned on the Preferred Shares.

  • Limited Indexation Factor means, in respect of a Limited Indexation Month or Limited Indexation Date, as the case may be, the ratio of the Index Figure applicable to that month or date, as the case may be, divided by the Index Figure applicable to the month or date, as the case may be, twelve months prior thereto, provided that (a) if such ratio is greater than the Maximum Indexation Factor specified in the relevant Final Terms, it shall be deemed to be equal to such Maximum Indexation Factor and (b) if such ratio is less than the Minimum Indexation Factor specified in the relevant Final Terms, it shall be deemed to be equal to such Minimum Indexation Factor;

  • Stress Factor means 2.25.

  • Adjustment Factor means, with respect to a share of the Fund (or one unit of any other security for which a Fund Closing Price must be determined), 1.0, subject to adjustment in the event of certain events affecting the shares of the Fund. See “—Anti-dilution Adjustments Relating to the Fund; Alternate Calculation —Anti-dilution Adjustments” below.

  • Loss Factor means the scaling factor determined in accordance with clause 7 and applied by the reconciliation manager to volumes of electricity measured or estimated in respect of ICPs on the Network, in order to reflect the impact of the ICP on Losses within the Network;

  • Discount Factor means the percentage discount applied to additional APCs when more than one APC is provided during the same visit (including the same APC provided more than once). Not all APCs are subject to a discount factor.

  • Certificate Factor With respect to any Class of Regular Certificates as of any Distribution Date, a fraction, expressed as a decimal carried to six places, the numerator of which is the aggregate Certificate Principal Balance (or the Notional Amount, in the case of the Class CE Certificates) of such Class of Certificates on such Distribution Date (after giving effect to any distributions of principal and allocations of Realized Losses in reduction of the Certificate Principal Balance (or the Notional Amount, in the case of the Class CE Certificates) of such Class of Certificates to be made on such Distribution Date), and the denominator of which is the initial aggregate Certificate Principal Balance (or the Notional Amount, in the case of the Class CE Certificates) of such Class of Certificates as of the Closing Date.

  • Note Pool Factor means, with respect to each Class of Notes as of any Payment Date, a seven-digit decimal figure equal to the Outstanding Amount of such Class of Notes as of such Payment Date (after giving effect to any reductions thereof to be made on such Payment Date) divided by the original outstanding principal balance of such Class of Notes.

  • emission factor means the average emission rate of a greenhouse gas relative to the activity data of a source stream assuming complete oxidation for combustion and complete conversion for all other chemical reactions;

  • Accumulation Period Factor means, for any Collection Period, a fraction with:

  • Grade point average or "GPA" means the grade point average earned by an eligible student and reported by the high school or participating institution in which the student was enrolled based on a scale of 4.0 or its equivalent if the high school or participating institution that the student attends does not use the 4.0 grade scale;

  • Power Factor means the ratio of usage power measured in kW to total power measured in kVA;

  • Leverage Factor means the leverage factor in respect of a Series of ETP Securities as specified in the relevant Final Terms.

  • Required Reserve Factor Floor means, for any Calculation Period, the sum (expressed as a percentage) of (a) 12.5% plus (b) the product of the Adjusted Dilution Ratio and the Dilution Horizon Ratio, in each case, as of the most recent Cut-Off Date.

  • Unit Price Table means the table of prices per unit set out in the Contract;

  • Quality factor (Q) means the modifying factor, listed in Tables I and II of 38.4(4), that is used to derive dose equivalent from absorbed dose.

  • Bond Factor Definition | Law Insider (2024)

    FAQs

    What is the meaning of bond factor? ›

    Bond Factor means the remaining of the capital outstanding over the interest period in relation to the original amount issued.

    What is a bond's legal definition? ›

    A bond refers to an obligation to pay a specified amount of money. In the field of business, a bond functions similar to a loan and is sold by entities seeking an inflow of cash now in exchange for the promise of future interest on that cash later.

    How is bond factor calculated? ›

    bond factor = (nominal / factor) - divide not multiply.

    What is a bond in finance? ›

    Bonds are issued by governments and corporations when they want to raise money. By buying a bond, you're giving the issuer a loan, and they agree to pay you back the face value of the loan on a specific date, and to pay you periodic interest payments along the way, usually twice a year.

    What is the bond order factor? ›

    Bond order is the number of bonding pairs of electrons between two atoms. In a covalent bond between two atoms, a single bond has a bond order of one, a double bond has a bond order of two, a triple bond has a bond order of three, and so on.

    What is the bond size factor? ›

    The bond size factor adjusts the computed RBC for those bonds that are subject to the size factor to more accurately reflect the risk. The bond size factor is to be multiplied by the risk-based capital of the bonds subject to the size factor.

    What is the legal definition of bonded? ›

    1 a : a usually formal written agreement by which a person undertakes to perform a certain act (as appear in court or fulfill the obligations of a contract) or abstain from performing an act (as committing a crime) with the condition that failure to perform or abstain will obligate the person or often a surety to pay a ...

    What are bond's terms? ›

    Term bonds are notes issued by companies to the public or investors with scheduled maturity dates. The term of the bond is the amount of time between bond issuance and bond maturity. On the maturity date of a term bond, the bond's face value, the principal amount, must be repaid to the bondholder.

    What does bond mean in cases? ›

    Determining Bond Amounts

    Bond is money or property put up to ensure the defendant's appearance in court. The judge considers several issues in determining the bond amount of the accused. These may include the: Possibility of fleeing. Possibility of threatening witnesses.

    What is the primary factor that determines a bond's value? ›

    Essentially, the price of a bond goes up and down depending on the value of the income provided by its coupon payments relative to broader interest rates. If prevailing interest rates increase above the bond's coupon rate, the bond becomes less attractive.

    What is a bond repayment factor? ›

    A Bond Factor is used when calculating the bond repayments to the Financial Institution. NB: Its NOT a percentage % – Its a Number value.

    How to calculate bond value? ›

    The bond valuation formula can be represented as: Price = ( Coupon × 1 − ( 1 + r ) − n r ) + Par Value ( 1 + r ) n . The bond value formula can be broken into two parts for better understanding. The first part is the present value of the coupons, and the second part is the discounted value of the par value.

    What does bonds mean in simple terms? ›

    Bonds are investment securities where an investor lends money to a company or a government for a set period of time, in exchange for regular interest payments. Once the bond reaches maturity, the bond issuer returns the investor's money.

    Is a bond a debt or asset? ›

    A bond, like an equity, is a financial asset that can change hands between financial market participants. Ultimately, a bond is a loan, packaged up into a piece of paper, or now into an electronic agreement, where there is a contract between the two parties.

    What is a bond in accounting for dummies? ›

    A bond is simply a loan taken out by a company. Instead of going to a bank, the company gets the money from investors who buy its bonds. In exchange for the capital, the company pays an interest coupon, which is the annual interest rate paid on a bond expressed as a percentage of the face value.

    What is exact meaning of bond? ›

    1. : to hold together or solidify by or as if by means of a bond (see bond entry 1) or binder (see binder sense 3) The glue didn't bond to the glass. 2. : to form a close relationship especially through frequent association.

    Do bonds factor in inflation? ›

    But with rising rates, the prices of existing bonds will fall. The longer the bond's tenor, the more the fall in price. So long bonds will yield negative returns in inflationary scenarios. Higher repo rates also affect the market value of bonds.

    What does interest rate factor mean? ›

    What is a factor rate? A factor rate is a percentage of the loan amount that you need to pay to repay the loan. Factor rates are expressed as decimals. For example, if you get a $50,000 loan with a factor rate of 1.10, you need to pay 110 percent of the amount you borrowed — $55,000 — to pay the loan off.

    What is discount factor for bond? ›

    The discount factor d(t) is the factor which, when multiplied by the total amount of money to be received (principal + interest), gives the price (present value) of the bond.

    References

    Top Articles
    Latest Posts
    Article information

    Author: Nathanial Hackett

    Last Updated:

    Views: 6248

    Rating: 4.1 / 5 (72 voted)

    Reviews: 87% of readers found this page helpful

    Author information

    Name: Nathanial Hackett

    Birthday: 1997-10-09

    Address: Apt. 935 264 Abshire Canyon, South Nerissachester, NM 01800

    Phone: +9752624861224

    Job: Forward Technology Assistant

    Hobby: Listening to music, Shopping, Vacation, Baton twirling, Flower arranging, Blacksmithing, Do it yourself

    Introduction: My name is Nathanial Hackett, I am a lovely, curious, smiling, lively, thoughtful, courageous, lively person who loves writing and wants to share my knowledge and understanding with you.